高电压的LED驱动器提供软件控制强度-High-Voltag
abstract: this circuit adapts a bias-supply ic for avalanche photodiodes (apds) to drive a high-voltage string of leds, thereby providing adjustable current, software shutdown, and logic indication of open-circuit faults.
recent advances in operating efficiency have expanded the use of leds from mere indicators to being a driving force in electronic lighting. increased reliability and ruggedness (compared to other lighting technologies) gives the led a bright future, indeed. many ics have been introduced in recent years for driving leds, but the issue of driving serial chains of leds has received less attention. one approach to that problem (figure 1) adapts a bias-supply ic for avalanche photodiodes (apds) to provide adjustable current, software shutdown, and logic indication of open-circuit faults.
figure 1. this apd driver (u1) has been modified to provide high-voltage led modules with software-adjustable intensity control.
the apd-bias ic (u1) has been reconfigured to allow its low-voltage dac output to modulate the high-voltage current-sense feedback through a high-voltage-output transconductance stage consisting of q2 and q3. these two complementary transistors provide first-order temperature compensation sufficient for the application.
equations from the max1932 data sheet are used to select components for the step-up dc-dc converter. the current-adjust transfer function is given by
where vcl is the current-limit threshold (2v), code is the digital code to the dac in decimal format, and iout is the desired output current. for the circuit shown, these conditions correspond to a full scale of 39ma and a resolution of 150µa. the 3-wire serial interface that controls u1 allows the user to shut u1 down by writing code 00hex to the dac. the circuit also provides an output-voltage limit. if an led fails open, the r5/r7 divider limits the output voltage to 50v (in this case). simultaneously, the cl pin goes high to indicate the open-fault condition.
a similar version of this article appeared in the september 30, 2004 issue of edn magazine.
linux syscall系统调用获取线程PID
什么是3D MEMS？三维微电子机械系统
国内EDA行业领军企业“概伦电子”获数亿元融资
电流传感器和功率计搭配如何测量变频电机效率
【干货分享】汽车以太网与TSN技术直播课问答集锦
高电压的LED驱动器提供软件控制强度-High-Voltag
聚焦：智物联11月上海双展精彩回顾
奇瑞瑞虎8 PLUS最大的亮点：48V轻混版
小白必备嵌入式开发学习内容
量子通信概念股龙头股有哪些_最新量子通信概念股龙头股
百度公司宣布全面开放ApolloRobotaxi自动驾驶出租车服务
模块电源灌封简介
iPhone7热点：整机275美元 爆炸惊动苹果介入调查
VoIP通讯原理解析
投光灯&泛光灯的双节锂电池供电方案
三星s8发布后，就这配置这价格，我还是等我国产小米6售价才1999
2020年我国汽车维保行业市场规模为7490亿元
Pasternack推出法兰型波导同轴适配器，覆盖波导频段整个频率范围
锂电池小常识
为什么不同模态的embedding在表征空间中形成不同的簇
recent advances in operating efficiency have expanded the use of leds from mere indicators to being a driving force in electronic lighting. increased reliability and ruggedness (compared to other lighting technologies) gives the led a bright future, indeed. many ics have been introduced in recent years for driving leds, but the issue of driving serial chains of leds has received less attention. one approach to that problem (figure 1) adapts a bias-supply ic for avalanche photodiodes (apds) to provide adjustable current, software shutdown, and logic indication of open-circuit faults.
figure 1. this apd driver (u1) has been modified to provide high-voltage led modules with software-adjustable intensity control.
the apd-bias ic (u1) has been reconfigured to allow its low-voltage dac output to modulate the high-voltage current-sense feedback through a high-voltage-output transconductance stage consisting of q2 and q3. these two complementary transistors provide first-order temperature compensation sufficient for the application.
equations from the max1932 data sheet are used to select components for the step-up dc-dc converter. the current-adjust transfer function is given by
where vcl is the current-limit threshold (2v), code is the digital code to the dac in decimal format, and iout is the desired output current. for the circuit shown, these conditions correspond to a full scale of 39ma and a resolution of 150µa. the 3-wire serial interface that controls u1 allows the user to shut u1 down by writing code 00hex to the dac. the circuit also provides an output-voltage limit. if an led fails open, the r5/r7 divider limits the output voltage to 50v (in this case). simultaneously, the cl pin goes high to indicate the open-fault condition.
a similar version of this article appeared in the september 30, 2004 issue of edn magazine.
linux syscall系统调用获取线程PID
什么是3D MEMS？三维微电子机械系统
国内EDA行业领军企业“概伦电子”获数亿元融资
电流传感器和功率计搭配如何测量变频电机效率
【干货分享】汽车以太网与TSN技术直播课问答集锦
高电压的LED驱动器提供软件控制强度-High-Voltag
聚焦：智物联11月上海双展精彩回顾
奇瑞瑞虎8 PLUS最大的亮点：48V轻混版
小白必备嵌入式开发学习内容
量子通信概念股龙头股有哪些_最新量子通信概念股龙头股
百度公司宣布全面开放ApolloRobotaxi自动驾驶出租车服务
模块电源灌封简介
iPhone7热点：整机275美元 爆炸惊动苹果介入调查
VoIP通讯原理解析
投光灯&泛光灯的双节锂电池供电方案
三星s8发布后，就这配置这价格，我还是等我国产小米6售价才1999
2020年我国汽车维保行业市场规模为7490亿元
Pasternack推出法兰型波导同轴适配器，覆盖波导频段整个频率范围
锂电池小常识
为什么不同模态的embedding在表征空间中形成不同的簇