LM317制作的发射电路
lm317 afm transmitter lm317制作的发射电路
300)this.width=300 align=top border=0>
a few years ago i built one of those projects that never worked, but it did do something unusual. the psu side of a portable receiver was very unusual in that it generated rf in the hf spectrum. the fault was traced to a couple of errors on the pcb. after a little investigation i used the error to build myself an hf cw qrp transmitter, based upon an lm317t voltage regulator chip!!! the circuit is given above and needs very little explanation. it operates from a 10 volt supply and regulates to about 4.5 volts. this is used to excite the tuned circuit vc1/l1. the tapping is about 3% of the total number of turns of l1. a 6% l1 tap is coupled to the control input if the lm317t regulator chip and bingo - it hoots. you can draw watts of power from a 12% tapping of l1. i see no reason why you cannot use a regulator chip rated at a few amps to get even more power out. i used this circuit on the air, on 1.8 mhz, and actually had a few cw contacts. it will certainly work on the new 70khz band, but i do not know how far you can push it into the hf spectrum. i have just presented the notes from my lab-book and now the rest is up to those who wish to experiment a little further. as a starting point for vc1 / l1, l1 is the usual formula: the number of turns is the wavelength in meters and the maximum value of vc1 is the same in pf (multiply by 2 because it is a variable capacitor). have fun, and if you have any major success, such as exceeding 10 watts, then drop me a line and tell me what you did.
SpaceX掌门人埃隆·马斯克的太空梦想，想在火星上建造一座城市
你知道植保无人机如何操作吗
人工智能的服务市场即将迎来突破性的发展
使用STM32WB设计BLE应用时影响功耗的内容
自动贴标机如何实现远程监控与智能运维
LM317制作的发射电路
华为官宣Mate20X5G版将于7月26日发布
Linear LT3745 16路50mA LED驱动方案
5G时代文化旅游有了怎样的改变
AMD公布GPU发展的线路图
水位传感器应用及安装
胶壳连接器有什么作用？
《中国联通5G车载终端白皮书》发布，移远通信携手推进智能网联汽车产业加速发展
电气火灾监控系统的功能都有哪些
iPhone6正式停产 系列产品销量占据苹果手机总销量的10%以上
如何测量强力磁铁的强度
Cosmic Circuits为ARM提供PLLs
新能源智能汽车创新峰会将在湖州举办
Anaqua被指定为通用汽车(GM)端对端知识产权管理提供商
阿里首次出现在自动驾驶计算机视觉算法集KITTI道路场景分割排行榜上
300)this.width=300 align=top border=0>
a few years ago i built one of those projects that never worked, but it did do something unusual. the psu side of a portable receiver was very unusual in that it generated rf in the hf spectrum. the fault was traced to a couple of errors on the pcb. after a little investigation i used the error to build myself an hf cw qrp transmitter, based upon an lm317t voltage regulator chip!!! the circuit is given above and needs very little explanation. it operates from a 10 volt supply and regulates to about 4.5 volts. this is used to excite the tuned circuit vc1/l1. the tapping is about 3% of the total number of turns of l1. a 6% l1 tap is coupled to the control input if the lm317t regulator chip and bingo - it hoots. you can draw watts of power from a 12% tapping of l1. i see no reason why you cannot use a regulator chip rated at a few amps to get even more power out. i used this circuit on the air, on 1.8 mhz, and actually had a few cw contacts. it will certainly work on the new 70khz band, but i do not know how far you can push it into the hf spectrum. i have just presented the notes from my lab-book and now the rest is up to those who wish to experiment a little further. as a starting point for vc1 / l1, l1 is the usual formula: the number of turns is the wavelength in meters and the maximum value of vc1 is the same in pf (multiply by 2 because it is a variable capacitor). have fun, and if you have any major success, such as exceeding 10 watts, then drop me a line and tell me what you did.
SpaceX掌门人埃隆·马斯克的太空梦想，想在火星上建造一座城市
你知道植保无人机如何操作吗
人工智能的服务市场即将迎来突破性的发展
使用STM32WB设计BLE应用时影响功耗的内容
自动贴标机如何实现远程监控与智能运维
LM317制作的发射电路
华为官宣Mate20X5G版将于7月26日发布
Linear LT3745 16路50mA LED驱动方案
5G时代文化旅游有了怎样的改变
AMD公布GPU发展的线路图
水位传感器应用及安装
胶壳连接器有什么作用？
《中国联通5G车载终端白皮书》发布，移远通信携手推进智能网联汽车产业加速发展
电气火灾监控系统的功能都有哪些
iPhone6正式停产 系列产品销量占据苹果手机总销量的10%以上
如何测量强力磁铁的强度
Cosmic Circuits为ARM提供PLLs
新能源智能汽车创新峰会将在湖州举办
Anaqua被指定为通用汽车(GM)端对端知识产权管理提供商
阿里首次出现在自动驾驶计算机视觉算法集KITTI道路场景分割排行榜上