The MAX1802 for Digital Still
digital camera supplies must be small and efficient. the power supplies must be relatively free of low-power noise, so that post filtering can be easily achieved. they must be capable of generating several voltages. most camera makers require 4 to 6 channels for power supplies. a typical block diagram of a digital still camera (dsc) indicating the different power supply channels is shown in figure 1.
figure 1. block diagram of a typical digital still camera.
most of the dsc systems also have a sub-processor (not shown in figure 1), which contains a real-time clock and memory controller. the sub-processor is powered by an always-on back-up supply to keep the sub-processor blocks alive during system shutdown. some manufacturers prefer that this supply be separated from the main battery supply to save battery life. in such systems an additional converter is necessary to provide the always-on backup power supply to the sub-processor.
the max1802 provides a complete single chip solution for powering the major blocks in digital still cameras and video cameras by integrating a high-efficiency step-down controller and converter each, and three auxiliary step-up controllers. the step-down controller is typically used for the main system power supply and the converter as the core power supply. the three auxiliary controllers are used for the lcd, ccd and motor power supplies. the max1801 is a slave controller that can be used with the max1802 to generate an independent led power supply, if necessary. the max1802 operates in a low-noise constant frequency pwm mode and the max1801 is synchronized to the max1802 oscillator.
the max1802 ic was targeted for applications that use three or four alkaline cells, or two li+ cells, as the basic power source to the system. however, some camera manufacturers are making a transition from 4aa cells to 2aa cells or 2 nimh. in systems with only 2aa batteries, but using a back-up power supply, the max1802 can be used in conjunction with a high-efficiency step-up max1833 converter. the max1833 serves as a back-up power supply and the max1802 provides the supply for all the dsc system blocks.
the application circuit for such a system is shown in figure 2, indicating the various blocks in the camera system to be powered by the max1802. the approach makes it possible to implement the configuration with minimal increase in component count. in addition to providing back-up power to the sub-processor, the max1833 helps to power the max1802 at start-up.
figure 2. the max1802 application circuit for dsc (2aa cells as input).
the max1802 uses an internal linear regulator powered from its vddm pin to power the internal circuitry. the output of this linear regulator is seen at vl. the max1802 has an under-voltage lockout threshold of 2.4v at the vl pin. at power-up the vl pin of the max1802 is forced to a diode drop below 3.3v using the max1833 (figure 2). the internal parasitic body diode of the ldo pulls up vddm. this allows the internal reference and oscillator circuits for the max1802 to start-up. this in turn enables the auxiliary controller designed for a 5v output that is also used to run the motor. the 5v output is used to power up the 3.3v output step-down controller through vddm (used as main system supply) and 1.5v output step-down converter (used for core processor power) through vddc (figure 2). the efficiency for this circuit at different loads and input voltages is shown in figure 3.
figure 3. efficiency curve for the max1802 with 2aa cell input.
this data indicates that the max1802 is an efficient solution for a portable system power supply where component count and board real estate are critical issues even when the input voltage is lower than the range specified in the max1802 data sheet.
电路板损坏是什么造成的？
半导体封装检测装备解决方案提供商快克股份发布2022第一季度报告
NeurlPS'23开源 | 首个！开放词汇3D实例分割！
飞书宣布于5月19日举办发布会 将重磅发布4.0版本
无线烟雾报警诱导风机控制系统
The MAX1802 for Digital Still
比特币现金遭遇“腰斩”！价格暴跌70% 比特币却再创新高|从华尔街到陆家嘴
无纺布表面缺陷检测仪的检测方法介绍
5G技术支持元宇宙的持续发展
安防巡逻机器人有什么作用
互联网络培训教程[1]
电感式传感器—差动变压器的标定
为什么物联网在由多种技术提供支持时效果最佳
东芝火箭炮电视X8900KF全新上市，音画升维引领OLED 新时代
网线不够长或网线断了怎么办，教你三个方法解决
出售Yokogawa AQ6370光谱分析仪
全面屏设计有几种解法？
TWS蓝牙耳机充电仓方案ETA9697：1uA低功耗, 耐压20V
华为Mate 30 Pro电池容量曝光采用了一块4500mAh的大电池
中移动5G商用仪器仪表采购项目招标,却遭美企作恶
figure 1. block diagram of a typical digital still camera.
most of the dsc systems also have a sub-processor (not shown in figure 1), which contains a real-time clock and memory controller. the sub-processor is powered by an always-on back-up supply to keep the sub-processor blocks alive during system shutdown. some manufacturers prefer that this supply be separated from the main battery supply to save battery life. in such systems an additional converter is necessary to provide the always-on backup power supply to the sub-processor.
the max1802 provides a complete single chip solution for powering the major blocks in digital still cameras and video cameras by integrating a high-efficiency step-down controller and converter each, and three auxiliary step-up controllers. the step-down controller is typically used for the main system power supply and the converter as the core power supply. the three auxiliary controllers are used for the lcd, ccd and motor power supplies. the max1801 is a slave controller that can be used with the max1802 to generate an independent led power supply, if necessary. the max1802 operates in a low-noise constant frequency pwm mode and the max1801 is synchronized to the max1802 oscillator.
the max1802 ic was targeted for applications that use three or four alkaline cells, or two li+ cells, as the basic power source to the system. however, some camera manufacturers are making a transition from 4aa cells to 2aa cells or 2 nimh. in systems with only 2aa batteries, but using a back-up power supply, the max1802 can be used in conjunction with a high-efficiency step-up max1833 converter. the max1833 serves as a back-up power supply and the max1802 provides the supply for all the dsc system blocks.
the application circuit for such a system is shown in figure 2, indicating the various blocks in the camera system to be powered by the max1802. the approach makes it possible to implement the configuration with minimal increase in component count. in addition to providing back-up power to the sub-processor, the max1833 helps to power the max1802 at start-up.
figure 2. the max1802 application circuit for dsc (2aa cells as input).
the max1802 uses an internal linear regulator powered from its vddm pin to power the internal circuitry. the output of this linear regulator is seen at vl. the max1802 has an under-voltage lockout threshold of 2.4v at the vl pin. at power-up the vl pin of the max1802 is forced to a diode drop below 3.3v using the max1833 (figure 2). the internal parasitic body diode of the ldo pulls up vddm. this allows the internal reference and oscillator circuits for the max1802 to start-up. this in turn enables the auxiliary controller designed for a 5v output that is also used to run the motor. the 5v output is used to power up the 3.3v output step-down controller through vddm (used as main system supply) and 1.5v output step-down converter (used for core processor power) through vddc (figure 2). the efficiency for this circuit at different loads and input voltages is shown in figure 3.
figure 3. efficiency curve for the max1802 with 2aa cell input.
this data indicates that the max1802 is an efficient solution for a portable system power supply where component count and board real estate are critical issues even when the input voltage is lower than the range specified in the max1802 data sheet.
电路板损坏是什么造成的？
半导体封装检测装备解决方案提供商快克股份发布2022第一季度报告
NeurlPS'23开源 | 首个！开放词汇3D实例分割！
飞书宣布于5月19日举办发布会 将重磅发布4.0版本
无线烟雾报警诱导风机控制系统
The MAX1802 for Digital Still
比特币现金遭遇“腰斩”！价格暴跌70% 比特币却再创新高|从华尔街到陆家嘴
无纺布表面缺陷检测仪的检测方法介绍
5G技术支持元宇宙的持续发展
安防巡逻机器人有什么作用
互联网络培训教程[1]
电感式传感器—差动变压器的标定
为什么物联网在由多种技术提供支持时效果最佳
东芝火箭炮电视X8900KF全新上市，音画升维引领OLED 新时代
网线不够长或网线断了怎么办，教你三个方法解决
出售Yokogawa AQ6370光谱分析仪
全面屏设计有几种解法？
TWS蓝牙耳机充电仓方案ETA9697：1uA低功耗, 耐压20V
华为Mate 30 Pro电池容量曝光采用了一块4500mAh的大电池
中移动5G商用仪器仪表采购项目招标,却遭美企作恶