60W吉他音箱 (60W Guitar Amplifier)
60w吉他音箱 (60w guitar amplifier)
amplifier parts:
r1__________________6k8 1w resistor
r2,r4_____________470r 1/4w resistors
r3__________________2k 1/2w trimmer cermet
r5,r6_______________4k7 1/2w resistors
r7________________220r 1/2w resistor
r8__________________2k2 1/2w resistor
r9_________________50k 1/2w trimmer cermet
r10________________68k 1/4w resistor
r11,r12______________r47 4w wirewound resistors
c1,c2,c4,c5________47΅f 63v electrolytic capacitors
c3________________100΅f 25v electrolytic capacitor
c6_________________33pf 63v ceramic capacitor
c7_______________1000΅f 50v electrolytic capacitor
c8_______________2200΅f 63v electrolytic capacitor (see notes)
d1_________________led any type and color
d2________diode bridge 200v 6a
q1,q2____________bd139 80v 1.5a npn transistors
q3_____________mj11016 120v 30a npn darlington transistor (see notes)
q4_____________mj11015 120v 30a pnp darlington transistor (see notes)
sw1_______________spst mains switch
f1__________________4a fuse with socket
t1________________220v primary, 48-50v secondary 75 to 150va mains transformer (see notes)
pl1_______________male mains plug
spkr______________one or more speakers wired in series or in parallel
total resulting impedance: 8 or 4 ohm
minimum power handling: 75w
preamplifier circuit diagram:
preamplifier parts:
p1,p2______________10k linear potentiometers
p3_________________10k log. potentiometer
r1,r2______________68k 1/4w resistors
r3________________680k 1/4w resistor
r4________________220k 1/4w resistor
r5_________________33k 1/4w resistor
r6,r16______________2k2 1/4w resistors
r7__________________5k6 1/4w resistor
r8,r21____________330r 1/4w resistors
r9_________________47k 1/4w resistor
r10_______________470r 1/4w resistor
r11_________________4k7 1/4w resistor
r12,r20____________10k 1/4w resistors
r13_______________100r 1/4w resistor
r14,r15____________47r 1/4w resistors
r17,r18,r19_______100k 1/4w resistors
c1,c4,c5,c6________10΅f 63v electrolytic capacitors
c2_________________47΅f 63v electrolytic capacitor
c3_________________47pf 63v ceramic capacitor
c7_________________15nf 63v polyester capacitor
c8_________________22nf 63v polyester capacitor
c9________________470nf 63v polyester capacitor
c10,c11,c12________10΅f 63v electrolytic capacitors
c13_______________220΅f 63v electrolytic capacitor
d1,d2____________bat46 100v 150ma schottky-barrier diodes (see notes)
q1,q3____________bc546 65v 100ma npn transistors
q2_______________bc556 65v 100ma pnp transistor
j1,j2___________6.3mm. mono jack sockets
sw1,sw2___________spst switches
circuit description:
this design adopts a well established circuit topology for the power amplifier, using a single-rail supply of about 60v and capacitor-coupling for the speaker(s). the advantages for a guitar amplifier are the very simple circuitry, even for comparatively high power outputs, and a certain built-in degree of loudspeaker protection, due to capacitor c8, preventing the voltage supply to be conveyed into loudspeakers in case of output transistors' failure.
the preamp is powered by the same 60v rails as the power amplifier, allowing to implement a two-transistors gain-block capable of delivering about 20v rms output. this provides a very high input overload capability.
technical data:
sensitivity:
35mv input for 40w 8 ohm output
42mv input for 60w 4 ohm output
frequency response:
50hz to 20khz -0.5db; -1.5db @ 40hz; -3.5db @ 30hz
total harmonic distortion @ 1khz and 8 ohm load:
below 0.1% up to 10w; 0.2% @ 30w
total harmonic distortion @ 10khz and 8 ohm load:
below 0.15% up to 10w; 0.3% @ 30w
total harmonic distortion @ 1khz and 4 ohm load:
below 0.18% up to 10w; 0.4% @ 60w
total harmonic distortion @ 10khz and 4 ohm load:
below 0.3% up to 10w; 0.6% @ 60w
treble control:
+9 / -16db @ 1khz; +12 / -24db @ 10khz
brightness control:
+6.5db @ 500hz; +7db @ 1khz; +8.5db @ 10khz
bass control:
-17.5db @ 100hz; -26db @ 50hz; -28db @ 40hz
notes:
the value listed for c8 is the minimum suggested value. a 3300΅f capacitor or two 2200΅f capacitors wired in parallel would be a better choice.
the darlington transistor types listed could be too oversized for such a design. you can substitute them with mj11014 (q3) and mj11013 (q4) or tip142 (q3) and tip147 (q4).
t1 transformer can be also a 24 + 24v or 25 + 25v type (i.e. 48v or 50v center tapped). obviously, the center-tap must be left unconnected.
d1 and d2 can be any schottky-barrier diode types. with these devices, the harmonic modifier operation will be hard. using for d1 and d2 two common 1n4148 silicon diodes, the harmonic modifier operation will be softer.
in all cases where darlington transistors are used as the output devices it is essential that the sensing transistor (q2) should be in as close thermal contact with the output transistors as possible. therefore a to126-case transistor type was chosen for easy bolting on the heatsink, very close to the output pair.
r9 must be trimmed in order to measure about half the voltage supply from the positive lead of c7 and ground. a better setting can be done using an oscilloscope, in order to obtain a symmetrical clipping of the output waveform at maximum output power.
to set quiescent current, remove temporarily the fuse f1 and insert the probes of an avo-meter in the two leads of the fuse holder.
set the volume control to the minimum and trimmer r3 to its minimum resistance.
power-on the circuit and adjust r3 to read a current drawing of about 30 to 35ma.
wait about 15 minutes, watch if the current is varying and readjust if necessary.
技术分享 | i.MX8M Plus开发板支持ov5640
有关高速PCB布局设计的避坑指南
基于51单片机的温度湿度采集系统设计
物联网技术有助于政府监管数据所有权
一种有源箝位Flyback软开关电路设计
60W吉他音箱 (60W Guitar Amplifier)
AEC-Q101的认证对象和测试项目
mega16单片机科学计算器程序源代码
2018年Finwise Summit纷智峰会将在日本东京召开 共同探讨区块链行业未来
关于射频干扰对GNSS威胁的讨论
AP6067锂电池充电IC_输入4.8V-20V 输出4.2/8.4V
WeLink助力中建西南院成功举办数字赋能培训
领存自主可控高端存储产品亮相
微波传声技术
观测者-3成首次利用太阳能主动探测台风中心的无人艇
基于HA13118的18瓦音频放大器电路
高通正式推出了全球首个Qualcomm QTM527毫米波天线模组
“一石三鸟”固相烧结策略！废旧锂离子电池直接再生研究获进展
格莱美大师助阵 华为nova 2系列与暑期档大片更配
大幅面扫描仪技术术语:Gamut(色彩饱和度)
amplifier parts:
r1__________________6k8 1w resistor
r2,r4_____________470r 1/4w resistors
r3__________________2k 1/2w trimmer cermet
r5,r6_______________4k7 1/2w resistors
r7________________220r 1/2w resistor
r8__________________2k2 1/2w resistor
r9_________________50k 1/2w trimmer cermet
r10________________68k 1/4w resistor
r11,r12______________r47 4w wirewound resistors
c1,c2,c4,c5________47΅f 63v electrolytic capacitors
c3________________100΅f 25v electrolytic capacitor
c6_________________33pf 63v ceramic capacitor
c7_______________1000΅f 50v electrolytic capacitor
c8_______________2200΅f 63v electrolytic capacitor (see notes)
d1_________________led any type and color
d2________diode bridge 200v 6a
q1,q2____________bd139 80v 1.5a npn transistors
q3_____________mj11016 120v 30a npn darlington transistor (see notes)
q4_____________mj11015 120v 30a pnp darlington transistor (see notes)
sw1_______________spst mains switch
f1__________________4a fuse with socket
t1________________220v primary, 48-50v secondary 75 to 150va mains transformer (see notes)
pl1_______________male mains plug
spkr______________one or more speakers wired in series or in parallel
total resulting impedance: 8 or 4 ohm
minimum power handling: 75w
preamplifier circuit diagram:
preamplifier parts:
p1,p2______________10k linear potentiometers
p3_________________10k log. potentiometer
r1,r2______________68k 1/4w resistors
r3________________680k 1/4w resistor
r4________________220k 1/4w resistor
r5_________________33k 1/4w resistor
r6,r16______________2k2 1/4w resistors
r7__________________5k6 1/4w resistor
r8,r21____________330r 1/4w resistors
r9_________________47k 1/4w resistor
r10_______________470r 1/4w resistor
r11_________________4k7 1/4w resistor
r12,r20____________10k 1/4w resistors
r13_______________100r 1/4w resistor
r14,r15____________47r 1/4w resistors
r17,r18,r19_______100k 1/4w resistors
c1,c4,c5,c6________10΅f 63v electrolytic capacitors
c2_________________47΅f 63v electrolytic capacitor
c3_________________47pf 63v ceramic capacitor
c7_________________15nf 63v polyester capacitor
c8_________________22nf 63v polyester capacitor
c9________________470nf 63v polyester capacitor
c10,c11,c12________10΅f 63v electrolytic capacitors
c13_______________220΅f 63v electrolytic capacitor
d1,d2____________bat46 100v 150ma schottky-barrier diodes (see notes)
q1,q3____________bc546 65v 100ma npn transistors
q2_______________bc556 65v 100ma pnp transistor
j1,j2___________6.3mm. mono jack sockets
sw1,sw2___________spst switches
circuit description:
this design adopts a well established circuit topology for the power amplifier, using a single-rail supply of about 60v and capacitor-coupling for the speaker(s). the advantages for a guitar amplifier are the very simple circuitry, even for comparatively high power outputs, and a certain built-in degree of loudspeaker protection, due to capacitor c8, preventing the voltage supply to be conveyed into loudspeakers in case of output transistors' failure.
the preamp is powered by the same 60v rails as the power amplifier, allowing to implement a two-transistors gain-block capable of delivering about 20v rms output. this provides a very high input overload capability.
technical data:
sensitivity:
35mv input for 40w 8 ohm output
42mv input for 60w 4 ohm output
frequency response:
50hz to 20khz -0.5db; -1.5db @ 40hz; -3.5db @ 30hz
total harmonic distortion @ 1khz and 8 ohm load:
below 0.1% up to 10w; 0.2% @ 30w
total harmonic distortion @ 10khz and 8 ohm load:
below 0.15% up to 10w; 0.3% @ 30w
total harmonic distortion @ 1khz and 4 ohm load:
below 0.18% up to 10w; 0.4% @ 60w
total harmonic distortion @ 10khz and 4 ohm load:
below 0.3% up to 10w; 0.6% @ 60w
treble control:
+9 / -16db @ 1khz; +12 / -24db @ 10khz
brightness control:
+6.5db @ 500hz; +7db @ 1khz; +8.5db @ 10khz
bass control:
-17.5db @ 100hz; -26db @ 50hz; -28db @ 40hz
notes:
the value listed for c8 is the minimum suggested value. a 3300΅f capacitor or two 2200΅f capacitors wired in parallel would be a better choice.
the darlington transistor types listed could be too oversized for such a design. you can substitute them with mj11014 (q3) and mj11013 (q4) or tip142 (q3) and tip147 (q4).
t1 transformer can be also a 24 + 24v or 25 + 25v type (i.e. 48v or 50v center tapped). obviously, the center-tap must be left unconnected.
d1 and d2 can be any schottky-barrier diode types. with these devices, the harmonic modifier operation will be hard. using for d1 and d2 two common 1n4148 silicon diodes, the harmonic modifier operation will be softer.
in all cases where darlington transistors are used as the output devices it is essential that the sensing transistor (q2) should be in as close thermal contact with the output transistors as possible. therefore a to126-case transistor type was chosen for easy bolting on the heatsink, very close to the output pair.
r9 must be trimmed in order to measure about half the voltage supply from the positive lead of c7 and ground. a better setting can be done using an oscilloscope, in order to obtain a symmetrical clipping of the output waveform at maximum output power.
to set quiescent current, remove temporarily the fuse f1 and insert the probes of an avo-meter in the two leads of the fuse holder.
set the volume control to the minimum and trimmer r3 to its minimum resistance.
power-on the circuit and adjust r3 to read a current drawing of about 30 to 35ma.
wait about 15 minutes, watch if the current is varying and readjust if necessary.
技术分享 | i.MX8M Plus开发板支持ov5640
有关高速PCB布局设计的避坑指南
基于51单片机的温度湿度采集系统设计
物联网技术有助于政府监管数据所有权
一种有源箝位Flyback软开关电路设计
60W吉他音箱 (60W Guitar Amplifier)
AEC-Q101的认证对象和测试项目
mega16单片机科学计算器程序源代码
2018年Finwise Summit纷智峰会将在日本东京召开 共同探讨区块链行业未来
关于射频干扰对GNSS威胁的讨论
AP6067锂电池充电IC_输入4.8V-20V 输出4.2/8.4V
WeLink助力中建西南院成功举办数字赋能培训
领存自主可控高端存储产品亮相
微波传声技术
观测者-3成首次利用太阳能主动探测台风中心的无人艇
基于HA13118的18瓦音频放大器电路
高通正式推出了全球首个Qualcomm QTM527毫米波天线模组
“一石三鸟”固相烧结策略！废旧锂离子电池直接再生研究获进展
格莱美大师助阵 华为nova 2系列与暑期档大片更配
大幅面扫描仪技术术语:Gamut(色彩饱和度)