Alarm Sounds When RF Transmitter is Out of Range
this design idea explains how a 915mhz receiver can sound an alarm when a transmitter moves beyond a predetermined boundary.
the receiver circuit of figure 1 sounds an audio alarm when the max2623 transmitter (figure 2) moves beyond a designated perimeter.the trigger distance depends on conditions and antenna design. in tests in a home environment with simple wire antennas, the distance was about five feet (1.5 meters).
the transmitter is a voltage-controlled oscillator, set to approximately 915mhz in the unlicensed industrial/scientific/medical (ism) band. it has a tuning voltage of 1.5v = 3 × r2/(r1 + r2), which lets you easily adjust the frequency by varying resistor values r1 and r2.
figure 1. this 915mhz receiver sounds an alarm when the comparator's inverting-input voltage drops below 400mv.
figure 2. the transmitter consists of a voltage-controlled oscillator, tuned by r1 and r2 to approximately 915mhz.
the receiver consists of the max2643 low-noise amplifier (lna), the max2203 power detector, the max9075 comparator, and a buzzer. when the transmitter is within range (carried by a child or a pet, for example), the receiver detects the rf signal and provides a voltage greater than 400mv at the inverting terminal of the comparator. because the reference voltage at the comparator's noninverting terminal is preset to approximately 400mv by resistors r9 and r10 (vref = 3 × r10/(r9 + r10)), the comparator output remains low.
when the transmitter moves outside the predetermined boundary, the detected rf produces less than 400mv at the comparator. the comparator then generates an output of approximately 3v, which turns on the buzzer and sounds an alert that the child or pet has wandered beyond the restricted perimeter. to increase the detection range, you can place additional lnas or variable-gain amplifiers (vgas) in front of the power detector. you can also increase or decrease the desired perimeter by adjusting r10 to change the comparator reference voltage vref.
iphone8什么时候上市？iphone8最新消息：iphone8：前后双摄+Home保留，指纹后置画风突变
有方科技智慧出行解决方案助力智能网联汽车行业加速驶入5G时代
霍尼韦尔与海信集团正式签约合作,双方将在哪些方面展开合作呢？
一加3T评测：旗舰手机不可否认！
解读个人人工智能/AI助手的发展
Alarm Sounds When RF Transmitter is Out of Range
电气设备的装配及安装固定牢
触屏手机从电阻屏演变到电磁屏
STM32的串口中断配置
三相电的功率计算方法介绍
欧盟委员会发布《2018年欧盟工业研发投资排行》中国共有11家企业进入全球前100名
来自单模光纤和多模光纤自述
万物智联步入下半场，TUYA开发者大会（香港）助力打造IoT新业态
你知道吗？台积电技术优势之一在于FoWLP封装
深度学习已至“瓶颈”？数据处理或许是一剂良药
水分对锂电池性能有何影响？水分对锂电池性能影响大吗？
低压低功耗CMOS电流反馈运算放大器设计
受市场需求趋缓影响 笔电双雄广达、仁宝较2015年营收同期减少
台积电用7纳米技术制造出了10亿颗功能完好的芯片
如何将MPO接口光模块与LC接口光模块进行连接？
the receiver circuit of figure 1 sounds an audio alarm when the max2623 transmitter (figure 2) moves beyond a designated perimeter.the trigger distance depends on conditions and antenna design. in tests in a home environment with simple wire antennas, the distance was about five feet (1.5 meters).
the transmitter is a voltage-controlled oscillator, set to approximately 915mhz in the unlicensed industrial/scientific/medical (ism) band. it has a tuning voltage of 1.5v = 3 × r2/(r1 + r2), which lets you easily adjust the frequency by varying resistor values r1 and r2.
figure 1. this 915mhz receiver sounds an alarm when the comparator's inverting-input voltage drops below 400mv.
figure 2. the transmitter consists of a voltage-controlled oscillator, tuned by r1 and r2 to approximately 915mhz.
the receiver consists of the max2643 low-noise amplifier (lna), the max2203 power detector, the max9075 comparator, and a buzzer. when the transmitter is within range (carried by a child or a pet, for example), the receiver detects the rf signal and provides a voltage greater than 400mv at the inverting terminal of the comparator. because the reference voltage at the comparator's noninverting terminal is preset to approximately 400mv by resistors r9 and r10 (vref = 3 × r10/(r9 + r10)), the comparator output remains low.
when the transmitter moves outside the predetermined boundary, the detected rf produces less than 400mv at the comparator. the comparator then generates an output of approximately 3v, which turns on the buzzer and sounds an alert that the child or pet has wandered beyond the restricted perimeter. to increase the detection range, you can place additional lnas or variable-gain amplifiers (vgas) in front of the power detector. you can also increase or decrease the desired perimeter by adjusting r10 to change the comparator reference voltage vref.
iphone8什么时候上市？iphone8最新消息：iphone8：前后双摄+Home保留，指纹后置画风突变
有方科技智慧出行解决方案助力智能网联汽车行业加速驶入5G时代
霍尼韦尔与海信集团正式签约合作,双方将在哪些方面展开合作呢？
一加3T评测：旗舰手机不可否认！
解读个人人工智能/AI助手的发展
Alarm Sounds When RF Transmitter is Out of Range
电气设备的装配及安装固定牢
触屏手机从电阻屏演变到电磁屏
STM32的串口中断配置
三相电的功率计算方法介绍
欧盟委员会发布《2018年欧盟工业研发投资排行》中国共有11家企业进入全球前100名
来自单模光纤和多模光纤自述
万物智联步入下半场，TUYA开发者大会（香港）助力打造IoT新业态
你知道吗？台积电技术优势之一在于FoWLP封装
深度学习已至“瓶颈”？数据处理或许是一剂良药
水分对锂电池性能有何影响？水分对锂电池性能影响大吗？
低压低功耗CMOS电流反馈运算放大器设计
受市场需求趋缓影响 笔电双雄广达、仁宝较2015年营收同期减少
台积电用7纳米技术制造出了10亿颗功能完好的芯片
如何将MPO接口光模块与LC接口光模块进行连接？