[图文]4字控制键盘电路

the keypad must be the kind with a common terminal and a separate connection for each key. on a 12-key pad, look for 13 terminals. the matrix type with 7 terminals will not do. the alarm is set by pressing a single key. choose the key you want to use and wire it to 'e'. choose the four keys you want to use to switch the alarm off, and connect them to 'a b c & d'. your code can include the non-numeric symbols. with a 12-key pad, over 10 000 different codes are available. wire the common to r1 and all the remaining keys to 'f'. when 'e' is pressed, current through d2 and r9 switches q5 on. the relay energises, and then holds itself on by providing base current for q5 through r10. the 12-volt output is switched from the off to the set terminal, and the led lights. to switch the alarm off again it is necessary to press a, b, c & d in the right order. the ic is a quad 2-input and gate, a cmos 4081. these gates only produce a high output when both inputs are high. pin 1 is held high by r5. this 'enables' gate 1, so that when 'a' is pressed, the output at pin 3 will go high. this output does two jobs. it locks itself high using r2 and it enables gate 2 by taking pin 5 high. the remaining gates operate in the same way, each locking itself on through a resistor and enabling its successor. if the correct code is entered, pin 10 will switch q4 on and so connect the base of q5 to ground. this causes q5 to switch off and the relay to drop out. any keys not wired to 'a b c d or e' are connected to the base of q3 by r7. whenever one of these 'wrong' keys is pressed, q3 takes pin 1 low. this removes the 'enable' from gate 1,

---

【飞创直线模组】激光焊接六轴三坐标平台应用方案
星空灰魅蓝Note5图赏 大气精致手感棒 不愧千元之王
首航4G主动安全智能终端SH-GM荣幸入选
浅析VR/AR头盔的可预测追踪技术
AR似乎成为了“下一只被吹上风口的猪”
[图文]4字控制键盘电路
受限物联网设备的节能技巧
FPGA核心电路
WiMinet 评说1.1：多跳无线网络的现状
华硕M80游戏主机拆解 做工及用料如何
2019年美国科技行业的七大预测：亚马逊或将成为全球市值最高的公司
魅族pro6发布会图文直播：最好定制化系统Flyme6 魅蓝X首发Helio P20！
智能抄表改变了传统抄表那些地方呢
ESD保护时怎样维持USB信号完整性
人工智能是什么学科
能给手机充电的智能雨伞还带自拍功能 您需要吗？
高通QC3.0的技术细节详解
飞兆半导体推出低导通电阻MOSFET
为跟随世界潮流，朝鲜研发应用“全盛”电子移动支付系统
电位器可以给小微直流电机调速吗？