高功率LED驱动器接受宽输入电压范围-High-Power
abstract: circuit based on a buck/boost converter controller regulates current to a white led, despite an allowed variation of input voltage from 2.7v to 16.5v.
the advent of high-power leds capable of replacing incandescent bulbs has produced a need for circuits that efficiently match the leds to available power sources (batteries, car electrical systems, etc.). the circuits should also be able to regulate and control the led light output, despite variations in output voltage from the power source.
the circuit of figure 1 starts and operates a 1a led from a voltage that ranges from 2.7v minimum (the end of life for three alkaline primary cells) to 16.5v maximum (the maximum voltage for 12v automobile systems). operation over that range is stable and smooth, even with more than 1ω of internal resistance at the power source.
figure 1. wide input-voltage range, high-power led driver.
an inductive, buck-boost converter controller (ic1) with external mosfet power switch is setup in a current-regulation loop using a 0.1ω current-sense resistor in series with the power led. (if the output circuit opens, the 6.2v zener diode turns on, starting a voltage regulation loop.) figure 2 shows the current regulation for 0.5a and 1a output currents, and figure 3 shows the corresponding efficiencies, all plotted vs. the operating range of input voltage.
figure 2. led current vs. supply voltage for the figure 1 circuit.
figure 3. efficiency vs. supply current for the figure 1 circuit.
replacing the 10kω feedback resistor (connected to the current-sense resistor) with a linear potentiometer of the same value enables efficient dimming of the led. starting from the maximum 1a regulation point set by the circuit values shown, the power-led current (and hence its light output) can then be linearly swept through a range of more than 20:1.
a similar version of this article appeared as a design brief in the january 20, 2005 issue of ed magazine.
苹果不再吝啬 终于要拿出可折叠设备
4个Python经典项目实战，练手必备！
“新基建”将加速应用场景迭代进化
漏电保护器详细资料
基于ICL7611和MAX872的线性稳压器电路图
高功率LED驱动器接受宽输入电压范围-High-Power
高保真耳机放大器,headphone amplifier
温湿度传感器、二氧化碳传感器在农业领域的应用
情人节礼物怎么挑选，适合情人节送男友的高格调数码好物
SSD是什么，SSD的简单介绍
ROHM旗下LAPIS Semiconductor开发出强化微控制器“ML620130家族”
WLAN双频低噪放电路的设计及测试仿真
为竞争苹果Animoji三星合作迪士尼推AR Emoji
数字矩阵和解码器区别
投资机构纷纷看空，尚德只能破产？
超高压架空输电线路张力架线的基本特征及优点
开关电源是什么？开关电源的定义和工作原理详解
一款用于Windows的开源反rookit (ARK)工具
高通5G技术推动行业应用落地 骁龙X50覆盖品类大增
电缆里面进水了该怎么办，有什么解决办法吗
the advent of high-power leds capable of replacing incandescent bulbs has produced a need for circuits that efficiently match the leds to available power sources (batteries, car electrical systems, etc.). the circuits should also be able to regulate and control the led light output, despite variations in output voltage from the power source.
the circuit of figure 1 starts and operates a 1a led from a voltage that ranges from 2.7v minimum (the end of life for three alkaline primary cells) to 16.5v maximum (the maximum voltage for 12v automobile systems). operation over that range is stable and smooth, even with more than 1ω of internal resistance at the power source.
figure 1. wide input-voltage range, high-power led driver.
an inductive, buck-boost converter controller (ic1) with external mosfet power switch is setup in a current-regulation loop using a 0.1ω current-sense resistor in series with the power led. (if the output circuit opens, the 6.2v zener diode turns on, starting a voltage regulation loop.) figure 2 shows the current regulation for 0.5a and 1a output currents, and figure 3 shows the corresponding efficiencies, all plotted vs. the operating range of input voltage.
figure 2. led current vs. supply voltage for the figure 1 circuit.
figure 3. efficiency vs. supply current for the figure 1 circuit.
replacing the 10kω feedback resistor (connected to the current-sense resistor) with a linear potentiometer of the same value enables efficient dimming of the led. starting from the maximum 1a regulation point set by the circuit values shown, the power-led current (and hence its light output) can then be linearly swept through a range of more than 20:1.
a similar version of this article appeared as a design brief in the january 20, 2005 issue of ed magazine.
苹果不再吝啬 终于要拿出可折叠设备
4个Python经典项目实战，练手必备！
“新基建”将加速应用场景迭代进化
漏电保护器详细资料
基于ICL7611和MAX872的线性稳压器电路图
高功率LED驱动器接受宽输入电压范围-High-Power
高保真耳机放大器,headphone amplifier
温湿度传感器、二氧化碳传感器在农业领域的应用
情人节礼物怎么挑选，适合情人节送男友的高格调数码好物
SSD是什么，SSD的简单介绍
ROHM旗下LAPIS Semiconductor开发出强化微控制器“ML620130家族”
WLAN双频低噪放电路的设计及测试仿真
为竞争苹果Animoji三星合作迪士尼推AR Emoji
数字矩阵和解码器区别
投资机构纷纷看空，尚德只能破产？
超高压架空输电线路张力架线的基本特征及优点
开关电源是什么？开关电源的定义和工作原理详解
一款用于Windows的开源反rookit (ARK)工具
高通5G技术推动行业应用落地 骁龙X50覆盖品类大增
电缆里面进水了该怎么办，有什么解决办法吗